Controller unit for I-Light Micro systems.

The system runs from the JST-XH balance connector on the 3S lipo flight pack and provides TX controlled lighting for pixel based systems (either our iLights or standard pixel strip).

Specifications:

Voltage: 12.6v (3S lipo)
Weight: 11g
Control method: servo channel or serial bus

Pixel Driver, I-Light Mini, Micro (12v/3S)

£35.00

Quantity

Pixel lights provide flexible and colourful lighting solutions for night flying aircraft. Our smaller I-Lights are built as pixels and of course standard ws2811 pixel strip has long been used on various night flying designs.

This contoller will drive both I-Lights and pixel strip, all controlled from a spare servo port on your RX.

The driver is powered from your 3S flight pack using the balance plug and gives you full TX based control of the lighting.

The controller provides the correct drive signals for the I-Light Micro blades or standard ws2811 12v pixel strip.
Voltage: 4v to 8.4v for controller (rx powered) / 3S for lights

Weight: 11g

Modes: I-Light or Pixel (up to 150 pixels)

Radio Types:

Servo signal (default)

JETI - ExBus

PowerBox - P2Bus

JR - DMSS

Spektrum - Sat/SRXL/SRXL2

Futaba - SBus / SBus.2

Graupner SUMD

Pixel Driver, I-Light Mini, Micro (12v/3S)

Details

Downloads

Tech Specs

Related Products